When it comes to mechanical parts that face constant wear, pressure, and friction, tungsten carbide bushings are among the most trusted materials.
They are used in pumps, compressors, turbines, and other high-load systems where failure is not an option.
Their outstanding durability comes mainly from two material properties — dureté et dureté. Both are vital, but they behave differently and often pull in opposite directions.
This article helps you understand what hardness and toughness mean, how they influence the performance of tungsten carbide bushings, and how the right balance leads to long-lasting reliability in harsh industrial conditions.
What Is Hardness?
Dureté measures how well a material resists deformation, scratching, or indentation. In simple words, it tells us how difficult it is to cut or wear the surface.
Tungsten carbide is known for its exceptional hardness, which ranges between 88–92 HRA, making it one of the hardest materials used in engineering — second only to diamond.
This hardness allows carbide bushings to:
Resist wear in abrasive environments
Keep tight clearances even under pressure
Maintain shape and surface quality over long operating hours
1). Typical Hardness Comparison
| Matériel | Dureté (HRA) | Relative Wear Resistance |
|---|---|---|
| Bronze | 45–60 | Faible |
| Acier trempé | 65–75 | Modéré |
| Carbure de tungstène | 88–92 | Très élevé |
The higher the hardness, the more resistant the bushing is to scratches, grooves, and deformation caused by sliding contact with shafts or abrasive particles.
What Is Toughness?
Dureté is the ability of a material to absorb energy and resist cracking or breaking under impact or stress.
While hardness prevents wear, toughness prevents brittle failure.
A material that is very hard but not tough can crack easily under vibration or shock loads.
Toughness depends on:
The type and amount of binder (Cobalt or Nickel)
The grain size of tungsten carbide particles
The sintering quality and porosité level
Tungsten carbide bushings achieve toughness through their composite structure — hard WC grains bonded by a softer, ductile metal binder that absorbs impact energy.
L'équilibre dureté-ténacité
In material science, dureté et dureté are often in conflict. Increasing hardness (by reducing binder or grain size) usually lowers toughness.
The best tungsten carbide bushings are those that strike the right balance between the two — hard enough to resist wear, but tough enough to resist cracking.
1). Typical Balance by Binder Content
| Binder Percentage | Dureté (HRA) | Relative Toughness | Application typique |
|---|---|---|---|
| 6% | 91–92 | Modéré | High-speed, light load |
| 9% | 89–90 | Haut | General-purpose pumps |
| 12% | 87–88 | Très élevé | Heavy-duty slurry or oilfield use |
Engineers select the grade based on working conditions — high hardness for precision, and high toughness for shock or impact situations.
The Role of Grain Size
Tungsten carbide bushings can be made from coarse-grain, medium-grain, or fine-grain powders.
Smaller grains increase hardness and improve surface finish. Larger grains add toughness and crack resistance.
| Type de grain | Typical Size | Main Benefit | Common Application |
|---|---|---|---|
| Fine-grain (0.5–1 µm) | Very small | High hardness, mirror polish | Seal rings, high-speed pumps |
| Medium-grain (1–3 µm) | Équilibré | Good mix of wear and shock resistance | Compressors, turbines |
| Coarse-grain (3–6 µm) | Large | High impact toughness | Mining, slurry pumps |
Hardness Testing Methods
Manufacturers verify carbide hardness using several standard tests:
Rockwell A (HRA): Most common for tungsten carbide; small conical diamond indenter under 60 kgf load.
Vickers (HV): Uses a square diamond pyramid and measures indentation size under controlled force.
Knoop (HK): Used for microhardness testing of thin coatings or small samples.
Each test ensures the material meets the required hardness specification for its intended service.
Why Toughness Matters in Real Applications
Even the hardest carbide can fail if it lacks toughness.
Real industrial environments involve vibration, pressure fluctuation, and misalignment — all of which can cause stress.
Par exemple:
In slurry pumps, sudden particle impact can chip hard but brittle materials.
In compressors, vibration or dry running can lead to thermal shock.
Tougher carbide grades prevent catastrophic cracking, reducing downtime and replacement costs.
Comparaison du carbure de tungstène avec d'autres matériaux
| Propriété | Carbure de tungstène | Céramique | Acier trempé |
|---|---|---|---|
| Dureté | Very High (88–92 HRA) | Very High (90+ HRA) | Moderate (70 HRA) |
| Dureté | High (metallic binder) | Low (brittle) | Modéré |
| Résistance à la corrosion | Excellent (Ni-bonded) | Bien | Limited |
Tungsten carbide stands out because it combines the hardness of ceramics with the toughness of metals, making it the best choice for severe wear conditions.
Real-World Selection Examples
| Application | Required Property | Niveau recommandé | Type de liant |
|---|---|---|---|
| Clean water pump | High hardness, smooth finish | Fine-grain WC | Co 6% |
| Slurry pump | Impact and erosion resistance | Coarse-grain WC | Co 12% |
| Seawater pump | Résistance à la corrosion | Fine-grain WC | Ni 8% |
| Compressor | Stabilité thermique | Medium-grain WC | Co 9% |
Choosing the correct combination ensures the bushing performs optimally in its environment.
Conclusion
Understanding hardness and toughness helps engineers select the right tungsten carbide grade for their application.
Hardness provides wear resistance and dimensional accuracy.
Toughness prevents cracking and failure under shock.
The best-performing bushings balance these properties for long service life and reliability.
For industries where downtime is costly, this balance directly impacts operating efficiency and total cost of ownership.
Si vous souhaitez en savoir plus sur une entreprise, n'hésitez pas à Contactez-nous.
English 
Español 
简体中文 
Français 
日本語 
한국어 
العربية 
Tiếng Việt